Interior design is the art and science of enhancing the interior of a building to achieve a healthier and more aesthetically pleasing environment for the people using the space. An interior designer is someone who plans, researches, coordinates, and manages such enhancement projects. Interior design is a multifaceted profession that includes conceptual development, space planning, site inspections, programming, research, communicating with the stakeholders of a project, construction management, and execution of the design.
Now Read Carefully details
When Stefani Bachetti’s office relocated to Chicago’s River North neighborhood, the new address was only a couple of blocks away from the old office. But while the move wasn’t a big deal, she did lose something major—workshop access. The building where Stefani, who does research for an industrial-design firm, used to work had housed a large shop outfitted with a table saw, an assembly bench, and a drill press. So Stefani decided if she could no longer go to that shop, she’d bring one to her by converting her brick-walled one-car garage into a workspace for building small-scale furniture projects.
Filling her garage with saws and clamps would have been easy, but because it has to pull double duty, storing tools and her car during winter, the layout required some problem solving. That’s where Tom Silva stepped in.
How to Build a Garage Workshop
The solution focused on mobility. “Stefani has a long, narrow space, so we made the big tools easy to move around, letting her squeeze her car in,” explains Tom. He added a folding stand to a table saw she had placed on a workbench under the window, where it was too high to use comfortably. Tom shifted the saw to one of the long walls and, in front of it, built a Murphy table that folds up and out of the way when not in use (see Steps 5–10).
“The new bench is lower, about 32 inches off the ground, making it more comfortable when sanding or using hand tools,” he says. “But it also works as an outfeed support that prevents plywood or long boards you’re cutting on the table saw from falling down.”
Step 1: Start with a garage
Turning the brick-walled 9-by-19½-foot garage into an efficient workshop required some smart space planning. During an episode of Ask TOH, Tom Silva showed homeowner Stefani Bachetti how to create a setup that worked for her.
Step 2: Create efficient storage
This shop is short on space, but Tom added a few details that a workspace of any size can benefit from. He and Stefani hung a 2-by-8-foot strip of pegboard that she had attached to a frame of 2×4s and leaned up against the wall.
“It was tucked behind the workbench, so you couldn’t access the lower part of the pegboard,” says Tom. Mounting the pegboard to the wall with masonry screws through a frame of 2×4s is the most economical way to keep frequently used tools close at hand and off the floor.
Step 3: Install soft flooring
Inexpensive 2-foot-square foam floor mats keep your feet and back happy during long shop sessions and prevent dropped tools from crashing onto the concrete floor. The price: about $1 per square foot for ¾-inch-thick foam. The interlocking tiles are easy to remove to make room for a car.
Step 4: Add ventilation
Tom fitted the top of a metal box fan with two threaded hooks that attach to two more hooks screwed into a 2×4 stretcher that spans the window. This will allow Stefani to pull in fresh air during warmer months and blow out sawdust and fumes when she’s working.
Step 5: Build the frame for a murphy table
Start by making the tabletop support and legs. Build a frame from 2×4s and deck screws; this one is 46 by 34 inches. Add a couple of 2×4s across its width for stability. Cut a pair of 2×4s to 31½ inches for legs so the table’s height is just below the saw. Screw utility hinges to the legs and to blocking between the frame and first joist, as shown.
Step 6: Attach the frame to the wall
Add three evenly spaced hinges to the back of the frame, then screw the other leaves to a 2×4 cleat. Holding the frame ¾ inch under the finished height, temporarily support the cleat and drill five pilot holes, as shown. Fasten with masonry screws.
Step 7: Top frame with plywood
Tom sized the frame to support a two-piece top made with easy-to-transport 2-by-4-foot sections of ¾-inch plywood. Lay down the first piece, as shown, then pull it away from the wall to create a 6-inch overhang, which will provide a surface to clamp to.
Step 8: Attach the first section
Countersink pilot holes in the first piece of plywood, as shown, to prevent the screwheads from damaging chisels or a circular-saw blade. Fasten through the top into the frame.
Step 9: Add a second section
Measure the distance between the first piece of plywood and the wall, and use a circular or table saw to rip a second piece to width to fill the void. Position the second piece of plywood, as shown, and drill countersink holes; fasten with screws.
Step 10: Secure the latch
Fold the table up and mount a gate latch’s striker arm to a wood spacer that extends just beyond the frame front; fasten the spacer to the top’s underside next to the frame. Slip the latch behind the arm, so it catches. Drill pilot holes, then fasten with masonry screws.
“The new bench is lower, about 32 inches off the ground,” says Tom. “That makes it more comfortable when sanding or using hand tools. But it also works as an outfeed support that prevents plywood or long boards you’re cutting on the table saw from falling down.”
To save more floor space, Tom suggested a sliding miter saw with an articulating arm, instead of rails that stick out in back. The saw’s design lets Stefani make crosscuts in boards up to 14 inches wide with the saw resting up against the wall. Its wheeled stand has outriggers to support long boards or lengths of molding, is easy to move around, and folds to store flat against the wall.
Step 11: Enjoy your new garage workshop!
Finally, the new setup is ready for Stefani’s first big project. “I made about 50 linear feet of oak open shelving,” she reports. The woodshop works so well, it could be bad news for the car. “It’s really dropped off my radar,” she says of the bright-red Ford Focus hatchback. “It’s only good for getting lumber and then coming home.”
Disclaimer Of https://thewomeninterest.com/
It must be agreed that the use of https://thewomeninterest.com/ website shall be at the user’s sole risk. To the maximum extent permitted by law, https://thewomeninterest.com/, its directors, employees, and agents will make no representations about the exactness of the website’s content or the content of any sites linked to the website of. https://thewomeninterest.com/ assumes:
no liability or responsibility for any errors, or inaccuracies,
personal injury or any damage to property resulting from the user’s access to and use of the website,
any interruption or cessation of transmission in relation to our website,
any bugs, Trojan horses, or viruses, which may be transmitted through the website or by any third party
any omissions or errors in content by way of content posted, transmitted, or emailed.
https://thewomeninterest.com/ does not guarantee, endorse, or assume responsibility for any product or service offered by a third party through the https://thewomeninterest.com/ website or any hyperlinked website or other advertising, and https://thewomeninterest.com/ will not be in any way be responsible for monitoring any transaction between the user and the third-party providers of services or products. The user should use his/her best judgment and exercise caution where appropriate. https://thewomeninterest.com/’s website may include hyperlinks to other websites owned or operated by parties other than us. https://thewomeninterest.com/ will not be held responsible for the exactness or availability of such other websites. Any inclusion of the hyperlink does not refer to any endorsement or recommendation of the content on such third-party websites.
It is reiterated that not all treatments that appear here at https://thewomeninterest.com/ website have been proven on a scientific basis. The information available on this site should in no way replace the advice of a doctor. https://thewomeninterest.com/ does not assume responsibility for the accuracy of the information provided here.
Please check with a professional or doctor before using any of the suggestions mentioned. https://thewomeninterest.com/ respects the intellectual property of others, and we request our users to do the same. https://thewomeninterest.com/ bears no responsibility for the content on other websites that the user may find while using Thewomeninterest.com products or services.